Correct processing method for maintaining conveying roller

Transfer gear roller manufacturers steering rod twin otter aircraft began as a 7075 piece of aluminum 10 "x 4" x 1.5 "and is completed in one operation. Because the first production can make or break the difficulty of grasping the ability to control part. This is a good work five axis roller processing center. Part of the product can be caught at one time, when it is best to use the material, and then tilt and rotate the roller products until the finish is almost finished. With the right strategy and a bit of luck, the rest of the supporting work roll production decline is fast and the spindle part mark or a piece of electric spark and partially completed.

Even without the use of the five axis machine, the use of this sacrificial material is a common practice with the odd shape of the idler workpiece. Rollers are the main manufacturers of workpiece clamping. Carrier method is a simple solution to the idler heterogeneous. "It is an interesting challenge to process as many parts as possible in the envelope and finish two operations or less time. Even the bottom of an additional 1/16 "material workpiece is usually sufficient to retain the conveyor belt portion. The machine can be fixed at the top and the sides of the machine by introducing the correct conveying method. The machine is then stored on the lower part of the machine or some kind of fixture that is easy to change the conveyor path. In this way, the conveyor belt and the roller are combined to complete the work piece.

This is one of the best examples of conveyor belt production, aluminum landing gear components by the roller of one of the customer program, linear precision machining production parts. Here are all the drawings that are almost completely in the design center, which is still in the control center section and removed from the production workers to complete the roller production. Another method is to locate the internal part of the function. A pair of adjacent holes to catch a part to make a pretty good place is fixed, that is why the conveyer belt joint and other workpiece clamping roller production plant with a series of expansion and internal collet control 3/16 diameter or smaller. The engineer pointed out one of the most recent examples of the combination of conveyor automation, where several parts of the rotary machine. The last position of a pair of 1.375 roller.


[last] Use of some rubber materials [next] Lifting of conveyor belt

Copyright © 2016 BaoDing City Jing Bo Rubber Co., LTD. All Rights   Email:info@hbjingbo.com